Even when your Zipp® wheels are in perfect shape, decals can have a way of looking a bit worn. Keep your Zipps looking fresh with a new set of decals. Available in multiple sizes:
• 101 (30 mm depth).
• 202 (32 mm rim depth).
• 303 (44 mm rim depth).
• 404 (58 mm rim depth).
• 808, 1080 (82 mm or 108mm rim depth).
• All discs.
Note: These white and silver decals were supplied with Zipp® rims beginning with the 2008 model year.
Peel or gently scrape off all parts of the old decal. Clean the rim well with soap and water and then use rubbing alcohol or acetone to remove any residual grime and grease. Slowly peel the backing off the decal; position the new decal over the rim and apply starting at one end. Work the air bubbles from the center toward the outside. Use a squeegee applicator (PA-1 from 3M™) to work the decal into the dimples.
If your decals are adhesive and not molded in, you can use a hair dryer to soften the glue, grab a corner and gently pull off, scrape the remainder off with your fingernails or a blunt popsicle stick, clean well with acetone or white spirits, allow to evaporate and apply the new decals. If the original decals are molded in, (use the thumbnail test to feel for an edge) you will have to purchase a set of decals and apply them over the top. Molded in decals cannot be removed without structural damage to the rim.
Please watch the video on replacing decals of the Video FAQ of Zipp.com.